Siemens PLM Software 2018 Simcenter Conference - Europe

Siemens PLM Software 2018 Simcenter Conference - Europe


 

 Please note this is a draft and subject to change.

Day 1 - Monday, December 3

Congress Hall I, II, III
07:00 - 17:00 Registration
09:00 - 09:10

Welcome & Introduction

Erich Buergel, Siemens PLM

09:10 - 09:40

Fighting bugs with HPC – and demonstrating regulatory compliance 

Ulf Lindblad, Tetrapak

09:40 - 10:20

Technology is shaping our future

Nancy Rademaker, Nexxworks

10:20 - 10:50 Break
10:50 - 11:20

Autonomous Vehicles: Social and Ethical Implilcations and the Role of Simulation and Testing

Joe Barkai

11:20 - 12:00

Simcenter Keynote Session
Jan Leuridan, Siemens PLM

12:00 - 12:30

Hybrid Electric Propulsion Systems for Aircraft - Digital Twin based design of disruptive technologies

Dr. Frank Anton, Siemens AG, eAircraft

12:30 - 13:30 Lunch

Congress Hall I Congress Hall II Congress Hall III Roma, Vienna, Madrid Athens, Barcelona, Berlin, Brussels
13:30 - 14:00 A comparison of the wind heeling moment determined through full-scale CFD against current naval stability standards
James Alderton, QinetiQ
GREEN: A tool to share, organize and simulate 0D-1D models 
Pierre Caillard, Renault
Team Velarde’s new wingman in the Red Bull Air Race World Championship
Matt Milne/Juan Velarde, Team Velarde
Process simulation - brazing simulation of heat exchangers with Simcenter STAR-CCM+
Georgios Apostolopoulos, MAHLE
Multiphase Flow Splitting in Åsgard Subsea Compression Manifold
Henrik Alfredsson, Aker Solutions
14:00 - 14:30

(The future) Simulation driven ship design

Dejan Radosavljevic  - Siemens PLM Software

Acoustic optimisation of an engine cam cover by means of experimental vibration and acoustic mapping in semi-anechoic chamber and vibration and acoustic simulation
PhD. Michele Iadevaia, Dipolo GmbH
Fluid system modelling and verification of a water spike apparatus for large civil turbofan aero engines
Adam Harris, Rolls-Royce
Transient heat up of entire vehiclepowerdrain in 3D (Solid/Fluid-Model)” and “Optimization of a novel exhaust heat exchanger with phase change material in 3D (Solid/Fluid-Model)”
Enes Aksamija, AVL Qpunkt GmbH
Parametric nozzle evaluation procedure for pressure vessels
Jacques Bester, Structa
14:30 - 15:00 Digital tools for multi-parameter / multi-objectives driven designs
Norbert Bulten, Wärtsilä Netherlands B. V.
Flow noise evaluation of mufflers based on transient CFD
Rolf Kaiser, Faurecia Clean Mobility
Experience of using DES approach to calculate aerodynamic characteristics of the Accord-201 aircraft
Andrey Kudryavtsev, SAEC
Statistical and optimisation techniques for the numerical characterization of Gasoline Direct Injection Spray Systems
Dr. Fabrizio Bonatesta, Oxford Brooks University (in collaboration with Ford)
Development of an Air Cooled Borescope for llame monitoring in an experimental DLE hydrogen combustor, Andreas Hogenschurz B&B-AGEMA GmbH
15:00 - 15:30 Break
15:30 - 16:00 Digital tools for system simulations of propulsion concepts & drivelines 
Norbert Bulten, Wärtsilä Netherlands B. V.
Aeroacoustic simulation of turbulent boundary layer induced automotive gap noise using zonal hybrid RANS/LES
Lars Erbig, Daimler AG
Modelling and Simulation in Landing Gear System Development
David Marles, Airbus
Reduced vehicle emissions
with SCR mixer optimization
Romain Boubennec, Renault
Comparison of mixing effectiveness of a static mixer between FLOEFD simulation and image concentration measurement
Tomas Daubner, Apex Group
16:00 - 16:30 Cavitation study on a “Rolla” marine propeller
Claudio Ghirlanda, Rolla SP Propellers SA
Thermal management and CFD simulation of automotive headlights
Arthur Jordan, Opel Automobile GmbH
Mechanical properties identification of woven, carbon fiber-reinforced composite in Simcenter
Sergei Nikolaev, Skolkovo Institue of Science and Technology
Development of a simulation tool chain for RDE (Real Driving Emissions)
Herve Dupont, Continental Automotive
Numerical simulations of flow-induced vibration of nuclear
Dr. Afaque Shams, NRG
16:30 - 17:00 Numerical analysis of the response of thin flexible membranes to free surface water flows
Mahtab Makaremi, Technical University of Chemnitz
The development of a new city bus transmission: Different aspects of system simulation using Simcenter Amesim in different development project phases
Dr. Oliver Kaufmann, Voith Turbo GmbH & Co. KG
Assembly of models, hierarchy of models and multi-physics coupled models configuration management for powerplant thermal integration
Yannick Sommerer, Airbus
A novel heat transfer model to reduce grid-dependency in ICEs simulations
Dr. Fabi Berni, Univeristy Modena and Reggio Emilia
Application of CFD in industrial process researchDr. Stefan Lipp, BASF SE


17:00 - 17:40

Product update Test

Bruno Massa, Siemens PLM

Product update STAR-CCM+

Dr. Deryl Snyder, Dr. Joel Davison, Siemens PLM

Product update 3D

Koen De Langhe, Siemens PLM

Product update 1D System Simulation

​David Gagne,Alberto Deponti, Siemens PLM

Product update MAD

Roland Feldhinkel, Siemens PLM

18:30 - 22:00 Offsite Networking Event (TBD)

Day 2 - Tuesday, December 4

Congress Hall I Congress Hall II Congress Hall III Roma, Vienna, Madrid Athens, Barcelona, Berlin, Brussels
08:30 - 09:00 Application of advanced CFD simulations for rising propulsion energy efficiency and seakeeping performance of ships – case study
Hanna Pruszko/Karol Niklas, Gdansk University of Technology
Coupling CFD computations with FEA vibroacoustic models to product low-frequency wind noise
Eric Bauer, Daimler AG
Virtual Integrated Aircraft technologies usage in Irkut MC-21 mid-range passenger aircraft Project
Antonio Poplavskii, Irkut Corporation
A comprehensive CFD framework to reduce the calibration efforts in SI combustion modelling
Prof. Stefano Fontanesi, University of Modena and Reggio Emilia
Modelling hydroturbine perfomance using FloMASTER
Morten Kjeldsen, InnoFour
09:00 - 09:30

Using NX open to adapt Simcenter 3D to our working methods
Frederik Vanhee, Gusto MSC

Living the V-model: NVH chassis testing strategies
Andreas Schilp, AZL Technology Center GmbH
Creation of automated test correlation -Digital Thread for Simulation & Test
Sean Sullivan, Design Automation Associates Inc.
The goal of this project is to extend the driving range of an electric city bus by securely exploiting the operating conditions of a given battery technology
Anouk Hol, VDL Enabling Transport Solution BV
Large eddy simulation of gas turbine combustion
Daniel Moell, Siemens Power & Gas
09:30 - 10:00 Optimization of a Direct Injection Strategy using Fully Integrated CFD Design Exploration
Simon Fischer, Siemens PLM Software
Using Simcenter to develop a multi-axle steering solution
Jean Labuschagne, ADG Mobility
Simulation of fuel supply lines in liquid-fuelled rocket engine
Vladimir Tkach, JSC NPO Energomash
To improve the combustion efficiency of a natural gas engine, piston shape optimization is investigates using Simcenter STAR-CCM+ optimization tool
Fabien Lacroix, Volvo Truck
Scale-down modelling – replicating large scale process operation in the lab
Alex Smith, The Centre for Process Innovation
10:00 - 10:30

Simulation of hydraulic, mechanical and electrical systems simulation within early design stages 

Dariusz Pioro, JCB

Get from complex CAD definition to usable fluid volumein Simcenter STAR-CCM+ with Wrapper
Petr Nekolny, Valeo Autoklimatizace k.s.
A modelling approach to HIRF (High-Intensity Radiated Field) in support toaircraft certification
Andrea Cantarutti, IDS
Using Simcenter STAR-CCM+ for predicting the backpressure of an exhaust / after-treatment
system for automotive application
Alex Leong, FORD
Thermal Analysis of Electronic Systems with T3Ster and FloEFD
Peter Fink, ZFW Stuttgart
10:30 - 11:00 Break
11:00 - 11:30 Using Model-Based-Design environment to manage complexityBenjamin Tenaud/Yohann Brunel, POCLAIN HYDRAULICS INDUSTRIE 
A novel approach to model the radiator fan in a VTM simulation
Saad Ahmed, BMW AG
A use case where code checks according to standards are required
Wouter  van den Bos, SDC Verifier
Towards 2030: Passenger car powertrain trends using simcenter Amesim
Fabien Rabeau, IFP Energies Nouvelles
Development of the virtual CFD model of VVER NPP primary circuit
Volkov Vasilii, OKB GIDROPRESS
11:30 - 12:00 Process optimization of an innovative combination of high pressure die casting and sheet metal forming using casting simulation with Simcenter STAR-CCM+PD Dr. Jürgen Jakumeit, Access e. V.
Vibro-acoustic analysis of an electric power steering system for passenger comfort mitigation
Stefano Orlando, ZF/Siemens
Optimisation train noses and tunnel portals to reduce the risk of sonic bangs
Gionata Manduchi/Steve Cochard, Stadlerrail/The Politechnico di Milano
Cooling calculations for the motor of an electrical vehicle
Karim Segond, E-cooling
Application of numerical analysis to the development of wind power plants with a focus on the noise emission during construction and operationDr. - Ing. Olgierd Zaleski, Novicos GmbH

12:00 - 12:30 Automated workflow for thermal evaluation in pre-developmentTheo Papadopoulos, Siemens CT
Reducing Amesim models in the form af a recursive neural network
Vincent Talon, Renault
Designing innovative cooling solutions for high power modules using CFD
Klaus Olesen, Danfoss Silicon Power GmbH

Thermal design and analysis of Battery Electric Vehicles
Fabiano Bet, InDesA GmbH

Digital Twins for exploring metal foams used as structured catalyst supportProf. Dr.-Ing. Gregor Wehinger, Institut für Chemische und Elektrochemische VerfahrenstechnikFachgebiet Dynamik Chemischer Prozesse

Technische Universität Clausthal

12:30 - 13:30 Lunch
13:30 - 14:00 Development of innovative type of hydraulic pressure amplifierIng. Peter Zavadinka, PistonPower s.r.o.
Virtual testing and fitting of a Mando brake assistance system with Simcenter Amesim
Erich Wachter, Mando Corporation Europe GmbH
Coupled electical, thermal and structural simulations for product development
George Chiriac, Continental Automotive Romania SRL
Design of Y-Junction of Exhaust Heat Recovery System (EHRS) using simulation.
Abdul Shaik, SAIC Motor UK

FLOEFD CASE Christian Jaekel, Siemens Power & Gas

14:00 - 14:30 Thermal design for Six Sigma of an imaging device
Wendy Luiten, WLC
Multi attribute balancing of NVH, Vehicle Energy Management and Drivability at early design stage using 1D system simulation modelTBD, Mitshubishi Motor Company


Unique high-performance immersion liquid cooling solution for 1U profile servers
Jon Halestrap, Iceotope
Managing of complex designs and huge CFD models
Raimund Vedder, Atlanting GmbH
Multiphase flow in a gas pipelineAllan Thomson, Perth Collage
14:30 - 15:00 SIMCENTER implementation of FEM/BEM methodologies as integrated simplified approaches to external gear pumps vibroacoustic analysisGiuseppe Miccoli, IMAMOTER - Institute for Agricultural and Earthmoving Machines
Battery Electric Vehicle (BEV) Thermal Management 1D and 3D CFD Co-simulationJan Majer, Ricardo Prague


Applied CFD in the field of sustainable design and human comfort

Dino van Deijzen, ABT
A quantitative validation of CFD in-cylinder flow motion results using PIV measurement
Dr. Giuseppe Virelli, Jaguar Landrover

ZF Wind Power specific use of FloMASTER   

Jo Loenders, ZF Wind Power

15:00 - 15:30 Break
15:30 - 16:00 Simulation based OBD calibration validation of FEV Virtual powertrain calibration platformEnder Nadir, FEV France
An Exhaust Purification System Development  of Heavy Duty Vehicle using Computer Simulation
Sunghoon Park , Hyundai Motors Group
From conceptional brainstorming to a customised condensing boiler
Georg Scheger, Hoval

Active Charge Air Cooling System development using system simulation
Chris Whelan, Air Cycle Technology
 

Optimisation of mixing performance of helical ribbon mixers for high throughput applications
Adam Kowalski/Ashkan Davoodi, Unilever

16:00 - 16:30 Autonomous vehicle formal model verification in synthetic environmentThusitha Parakrama, Mobis Parts Europe NV
Multi-Attribute Balancing in Automotive Developmen
Kim Bladh/Erik Wendeberg, CAE Value


HVAC and thermal management study for a wind turbine
Maarten Groothoff, Ingenieursbureau H.E.C.

NVH analysis of an e-powertrain: combined tests and simulations towards successful solution definition
Jessica Weger, Valeo Siemens e-Automotive
Transient and stationary CFD simulation of the aerodynamic sealing behaviour by air curtainsProf. Dr. Franz Magerl, Ostbayerische Technische Hochschule Amberg‐Weiden
16:30 - 17:00

CFD and CHT Simulations for Electric Powertrains at AUDI using STAR-CCM+

Maximilian Schroeder, Audi AG

Application of acoustic arrays on automotive turbocharger environments
Alexandre Rigault, Garrett Advancing Motion

Software- Simulation led pump design with the Simcenter Portfolio

Markus Zimmermann, Siemens PLM 

In-Cylinder Flow Validation of Star-ICE using High-Speed PIV in an Optical Accessible GDI Engine
Annette Jooss, Daimler AG
Fluid-structure interaction of blood flow in human aorta under dynamic conditions: A numerical approach
Prof Luca Montorsi, University of modena and Reggio Emilia
 17:00 - 17:30Automatic virtual scenario creation for automated drivingRobin Vandermaeden, TASS International 
 Fluid Structure Interaction of a Rotating Automotive Wheel in contact with the ground using a weakly-coupled overset approach
Jesus Vilar Canovas, Jaguar Landrover
  Respiratory therapy: designing of the gas delivery system and patient interface in CFD
Christopher Varga, Vyaire Medical
 Day 3 - Wednesday, December 5
     

Congress Hall I Congress Hall II Congress Hall III Roma, Vienna, Madrid Athens, Barcelona, Berlin, Brussels

Track 1: System Simulation
Track 4: STAR-CCM+ Track 3: TEST Track 2: 3D Track 5: Synergies
08:30 - 10:00 1D model simplification and runtime optimization
Advanced Post-Processing in STAR-CCM+ Best practices of Sound Quality engineering Fundamentals of Modeling with Simcenter 3D Introduction to MotorSolve: Rapid Electric Motor Design
10:00 - 10:30 Break
10:30 - 12:00 Electric Vehicle workshop Turbulence Modelling Enhanced Integrated Transfer Path Analysis techniques Nonlinear analysis in Simcenter 3D Frontloading CFD for designers with Simcenter FloEFD
12:00 - 13:00 Lunch
13:00 - 14:30 CAD import for direct generation of mechanical and fluid systems

Modelling Multiphase Flows Driving Innovation and Productivity with Simcenter Testlab Neo Predicting and simulating noise: integrated Vibro and Aero-acoustic approach
HEEDS for simulation and test solutions of the Simcenter portfolio
14:30 - 15:00 Break
15:00 - 16:30 1D Simulation of thermo-fluid systems and components
Intelligent automation without Java! Modal Analysis: new techniques and methods Performing simulation in managed context: Teamcenter for Simulation
Mechatronics - Combining 3D Multi-Body Simulation with 1D Actuation and control simulation

    Top